Custom Printed HTV Transfers
What is the preferred file type?
Please note, while preferred file type is SVG some PNGs will print, but understand that no adjustments can be made to colors, small PNG files will not enlarge well without pixelation.
Are there setup fees?
Set up fee: For first print is $8/$12. Pricing depends solely on pick up or shipping. Each additional print (of same image) is $5/$8 (also depends on P/U or Shipped)
What is the turnaround time?
No printing will start until the order is paid. TAT is 2-5 days depending on payment date, NOT ordering date. Mailing Date will be within the same TAT time frame. Please allow for shipping time.
Item Instructions
Gang Sheet Transfer Pressing Instructions
(Local pick up ONLY currently)
• You will first need to weed out all the areas that don’t belong in the image.
• Once weeded, you will need to mask the design to transfer to what you are pressing transfer to.
• varnish print with squeegee (or something like it) with print facing up.
• Flip image over and peel backing off (slowly, vinyl is extremely thin)
• Press garnet for 3-5 seconds to remove moisture
• Press transfer at 300-310° for 15 seconds.
• I press multiple times, different directions ( sometimes inside out) rest in between pressing
• Cold peel masking off
• Press one final time (with Teflon) to seal edges on transfer
Transfer Pressing Instructions
• varnish print with squeegee (or something like it) with print facing up.
• Flip image over and peel backing off (slowly, vinyl is extremely thin)
• Press garnet for 3-5 seconds to remove moisture
• Press transfer at 300-310° for 15 seconds.
• I press multiple times, different directions ( sometimes inside out) rest in between pressing
• Cold peel masking off
• Press one final time (with Teflon) to seal edges on transfer
Washing Instructions
• Turn garment inside out
• Machine wash cold
• No Bleach
• No fabric softener
• No dryer sheets
• Air dry is best
• Tumble dry on low if needed
PUFF DESIGNS: Air dry ONLY recommended